Run-On Function; Interval Ventilation; Lighting; Saturation Notification - Gaggenau AL 400 721 Manual De Instrucciones

Setting the duration
You can set the duration after which the Intensive
setting switches off automatically.
Duration Press buttons simultaneously
Ž
3 minutes
and 1
Ž
5 minutes
and 2
Ž
10 minutes
and 3
The factory setting is set to 5 minutes.

Run-on function

The run-on function can be set for any fan speed.
1 First press the button for the desired fan speed 1,
Ž
2, 3 or and then press the
Notes
‒ The run-on time is ten minutes for all fan speed
settings. Once this time has elapsed,
ventilation switches off automatically.
‒ If the lighting is switched on, it remains on.
2 To switch off the run-on function earlier, press the
ÿ
button.

Interval ventilation

For interval ventilation, the device is switched on
automatically for five minutes per hour.
ÿ
1 Press the button to switch on the appliance.
The fan starts at level 2. The interval ventilation
can be used on level 1, 2 or 3.
2 Press the run-on button
Note: This mode is indicated by alternating
ž
lighting up of the
corresponding speed.
3 To end interval ventilation, press the
ž
button.
ž
twice.
button with the
ÿ
button.

Lighting

The lighting can be switched on and off independently
of the ventilation.
@
Press the button.
Setting the brightness
@
Press and hold the button until the desired
brightness is reached.

Saturation notification

After 30 hours of operation, the saturation display
of the grease filter blinks.
▯
At the latest now the metal mesh grease filter
should be cleaned. For instructions on how to
clean the metal mesh grease filter, please see the
Cleaning and maintenance
chapter about
▯
While the saturation display is blinking, it can be
œ
reset with the button.
œ
.
11