Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
÷
÷
ANTENNAiCATV
CONNECTIONS
_
ombination
VNF/UHF
Antenna
Single
75 ohm
Cable
/
/
Splitter
Take off the SpEitter
/
---UN F Antenna
300 ohm Twin=lead
Wire
"_"-_
VNF Antenna
Single
75 ohm
CabJe
=:::::m
300 ohm Twin-iea_ire
300-75
ohm
Matching
Transformer
(not supplied)
supplied)
300-75
ohm
incoming
CATV
Matching
Transformer
(not supplied)
_
:===_
Converter/Descrarnbler _:_
_
This television
has an extended
tuning range and can tune most
cable channels without
using a
cable company
supplied
converter
box. Some cable
companies
offer "premium
pay
channels"
in which the signal is
scrambled.
Descrambling
these
signals
for normal viewing
requires
the use of a descrambler
device
which is generally
provided
by the cable company.
Separate
VHF/UHF
Antennae
Connect
the 75 ohm Cable from the VHF antenna
and the UHF
antenna
Twin-lead
to a combiner
(not supplied).
Attach the Combiner
to the Antenna
Jack.
NOTE:
If your VHF antenna
has a Twin-lead
Wire, use the 300-75
ohm Matching
Transformer
(not supplied),
then connect
the
Transformer
to the Combiner.
For Subscribers
to Basic
CaMe
TV Service
For basic cable service
not requiring
a Converter/Descrambler
box,
connect
the CATV 75 ohm Coaxial
Cable directly
to the Antenna
Jack on the back of the television.
For Subscribers
to ScramMed
CabBe TV Service
If you subscribe
to a cable service
which requires
the use of a
Converter/Descrambler
box, connect
the incoming
cable to the
Converter/Descrambler
box and connect
the output
of the box to the
Antenna
Jack on the back of the television.
Follow the connections
shown
left. Set the television
to the output
of the Converter/
Descrambler
box (usually
channel
3 or 4) and use the Converter/
Descrambler
box to select
channels.
Combination
VHF/UHF
Antenna
(Singme
75 ohm
Cable
or
300 ohm
Twinqead
Wire)
Connect
the 75 ohm cable
from a combination
VHF/UHF
antenna
to
the Antenna
Jack. If your combination
antenna
has a 300 ohm Twin-
lead Wire, use the 300-75
ohm Matching
Transformer
(not supplied).
Combination
VHF/UHF
Antenna
(Separate
VHF and
UNF
300 ohm
Twinqeads)
Connect
the UHF Twin-lead
Wire to a Combiner
(not supplied).
Connect
the VHF Twin-lead
to the 300-75
ohm Matching
Transformer
(not supplied).
Attach the Transformer to the Combiner.
Attach the Combiner to the Antenna Jack.
For Subscribers
to UnserambJed
Basic
CaMe
with
ScramMed
Premium
Channems
If you subscribe
to a cable service
in which basic cable
channels
are unscrambled
and premium
channels
require
the use of a
Converter/Descrambler
box, you may wish to use a two-set
signal
splitter
(sometimes
called
a "two-set
coupler")
and an A/B Switch
box from the cable
installer
or an electronics
supply store.
Follow
the connections
shown
left. With the switch
in the "B" position,
you
can directly
tune any nonscrambled
channels
on your TV. With the
switch in the "A" position,
tune your TV to the output of the Converter/
Descrambler
box (usually
channel
3 or 4) and use the box to tune
scrambled
channels.
AUDiO/ViDEO
JACK CONNECTIONS
The exact
arrangement
you use to interconnect
various
video
and audio
components
to the TV is dependent
on the model
and features
of each component.
Check the Owner's
Manual
provided
with each component
for the location
of video
and audio
inputs
and outputs.
The connection
diagrams
below
are offered
as suggestions.
You
may need to modify
them
to accommodate
your particular
assortment
of components.
The diagrams
are intended
to show
component
video
and audio
interconnections
only.
Press
the TV/AV
selector
button
to select
the AV mode to use the TV as a monitor.
Operate
your
VCR as usual.
TV/AV SELECTION
If you connect
the TV to a VCR, camcorder,
or TV game,
through
the audioNideo
in jacks,
use the TV/AV
button
to make your
selection.
Press the TV/AV button repeatedly to select the desired mode.
"AUX1" or "AUX2" will display on the screen for 4 seconds.
r+
Tv--€.
AUX1 _
AUX2 7
1. To connect
the TV to a VCR
VCR
111
To Audio/Video
OUT
6
I
AUX 1 1
Rear of TV
/
AUDiO(R)
(not supplied)
2. To connect the TV to a TV Game
The TV can also be used as a display
device
for many
video
games.
However,
due to the wide variety
of different
types
of
signal
generated
by these
devices
and subsequent
hook-up
variations
required,
they
have not all been
included
in the
suggested
connection
diagrams.
You'll
need to consult
each
component's
Owner's
Manual
for additional
information.
To Audio/Video
OUT
[
TVGAME
I
tit
(not supplied)
3. To connect
the TV to the
camcorder
To playback
from the camcorder,
connect
the camcorder
to the
TV as shown,
V OUT jack
_
Front of TV
tff
(not supplied)
Front of TV
l'tl
÷
3R20521A-E
÷
27/4/04,14:05
Publicidad
Tabla de contenido
