Dmx-512 Connection; Dmx Addressing - Beamz SparkleWall LED96 RGBW 3x2mtr Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

CONTROLLER

DMX-512 CONNECTION

If you are using a standard DMX controller, you can connect the DMX output of the controller directly to the DMX input of the
first unit in a DMX chain. Always connect the output of one unit with the input of the next unit until all units are connected.
If you use a controller with 5 pin DMX connection you will need to use a 5-pin to 3-pin adapter.
At the last fixture, the DMX cable has to be terminated. Solder a 120 Ohm resistor between signal (-) and signal
(+) into a 3-pin XLR connector and plug this into the DMX output of the last fixture in the chain.

DMX ADDRESSING

The controller of this LED curtain use 8 DMX channels. To ensure that the control signals are properly directed to each device,
the device requires addressing. This is to be adjusted for every single device by changing the DMX starting address via the
control board.
The DMX starting address is defined as the first channel from which the device will respond to the controller. Please make sure
that you do not have any overlapping DMX channels in order to control each device correctly and independently. If several units
are defined on one DMX address, they will work synchronously.
DMX SETTING
Channel
Function
1
Master Dimmer
2
LED Red or ¼ coolwhite
3
LED Green or ¼ coolwhite
4
LED Blue or ¼ coolwhite
5
LED White or ¼ coolwhite
6
Strobe
7
Mode
8
Speed
MENU
Use to access the menu or return a previous menu option.
UP
Navigates upwards through the menu list and increases the value when in a
function.
DOWN
Navigates downwards through the menu list and decreases the value when
in a function.
ENTER
Used to select and store the current menu or confirm the current function
value or option within a menu
Value
Description
000-255
Dimming 0-100%
000-255
Dimming 0-100%
000-255
Dimming 0-100%
000-255
Dimming 0-100%
000-255
Dimming 0-100%
000-003
No strobe
004-255
Strobe (slow-fast)
000-050
Manual control CH1-6
051-200
Auto mode
201-255
Sound mode
000-255
Auto mode speed
4

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sparklewall led96 coolwhite 3x2mtrSparklewall led36 rgbw 1x2mtr151.200151.201151.202Sparklewall led96 rgbw ... Mostrar todo

Tabla de contenido