Connections; To The Water Reserve; To The Plants - JARDIBRIC KIT DRIP PUMP Manual De Instrucciones

5
/

cOnnEctIOnS:

tO thE wAtER RESERvE

tO thE plAntS

1. Cut a piece of microtube (with a pair of scissors) of
the wanted length.
2. Connect the tube under the
DripPump.
3. Connect the other end of the tube to the filter and
position it in the water reserve at the very bottom of it
so the system works well.
The filter allows to keep the drippers away
from being obstructed by impurities of the
water reserve.
1. Cut around 20 cm of microtube and connect it under
the symbol of the DripPump.
En
symbol of the
15