Faber AGORÀ Manual De Instrucciones página 9

• Slightly widen the two sides of the flue and hook them
behind the bracket 7.2 , making sure that they are well
seated.
• Fix the lower section of the flue and the cable raceway to
the hood body from above, using the 6 screws 12m (2.9 x
18) provided.
Mounting the hood body
• Adjust the two screws Vr, on brackets 11a, to a mini-
mum.
• Hook the hood canopy onto the two brackets 11a.
• Remove the metal grease filters by turning the handles
provided.
• From inside the hood canopy, adjust the screws Vr to set
the Hood Canopy level.
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the
chimney using either a flexible or rigid pipe ø 150 or 120
mm, the choice of which is left to the installer.
• To install a ø 120 mm air exhaust connection, insert the
reducer flange 9 on the hood body outlet.
• Fix the pipe in position using sufficient pipe clamps (not
supplied).
• Remove possible charcoal filters.
EN
Flue assembly
Connections
12m
Vr
ø 150
7.2
ø 120
9
9
9