Dimmer; Troubleshooting - Teac R-5 Manual Del Usuario

Dimmer

You can adjust the display brightness.
Press the SNOOZE/DIMMER button to adjust
the display brightness.
The display brightness changes as follows:
When the R-5 is used on the AC
adaptor's power:
Maximum
Medium
The back light is off.
When the R-5 is used on battery power:
Medium
The back light is off.
20 20
z
z
Low
z
z
Low
z

Troubleshooting

If you have problems with your system, look
through this chart and see if you can solve the
problem yourself before calling your dealer or
TEAC service center.
Standby indicator does not light.
e When the unit is used on battery power,
the indicator does not light to save the
battery life.
No power
e If the batteries are discharged, connect the
AC adaptor to recharge the batteries.
e Check the connection to the AC power
supply. Check and make sure the AC source
is not a switched outlet and that, if it is,
the switch is turned on. Make sure there
is power to the AC outlet by plugging
another item such as a lamp or fan into the
outlet.
No sound
e Turn the unit on and adjust the volume.
e Selec t the source by pressing the
FUNCTION button.
e Pull out the headphone's plug from the
PHONES jack.
The sound is noisy.
e The unit is too close to a TV set or similar
electronic appliances. Install the unit further
from them, or turn them off. Also try a
different electrical outlet or use your R-5 on
battery power to see if the noise is coming
from your electrical connection.