System Requirement; Software Installation; Safety Instructions - i-tec MYSAFEU311 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 8
EN

SYSTEM REQUIREMENT

• Windows XP/Vista/7/8/8.1/10 – no need driver installation
• macOS 10.x and higher – no need driver installation
• Available USB port (we recommend using free USB 3.0 port to use maximal speed of HDD)
HARDWARE INSTALLATION OF SATA HDD
Proceed according to following instruction:
1. Pull out internal part of frame.
2. Connect SATA connector of HDD to SATA port of the motherboard.
3. Insert HDD with internal part back to the frame
4. Screw it up from the bottom part
Note: For proper device functionality you have to format the HDD first.
Follow the instructions below.
NEW HDD FORMAT
1. Right click „Computer".
2. Select „Manage".
3. Left click „Disk Management".
4. Choose „Unallocated" HDD with right capacity.
5. Right click disk area and select „New Simple Volume", then click „Next".
6. Use max. capacity of Volume and click „Next".
7. Select „Assign the following drive letter" and click „Next".
8. Select „Format this volume with the following settings" (use original settings). Click
„Next" and „Finish".
9. Format of HDD will process. Format time depends on capacity of volume. After finish
is HDD visible in OS.

SOFTWARE INSTALLATION

• Windows XP/Vista/7/8/8.1/10 or macOS 10.x
• After the connection to PC or Macintosh – system will detect equipment and will
complete the driver installation automatically.
PACKAGE CONTENT
• External Enclosure for 2.5" HDD
• USB 3.0 cable
• Set of screws for mounting HDD and internal enclosure part
• User Guide

SAFETY INSTRUCTIONS

• Do not expose to extreme temperatures and air humidity.
• Use the device on flat surfaces – you will prevent it from slipping and falling to the ground.
• Save the user manual for a possible use later.
In cooperation with the service department:
• Check functionality after falling to water or to the ground.
• Check functionality when the cover is broken.
• Send the device back if it does not work in accordance with the user manual.
FAQ
Available on our website www.i-tec.cz/en/ on the „FAQ" tab of this product.
4
Quick Start / MySafe USB 3.0 2.5" External Case

Publicidad

Tabla de contenido
loading

Tabla de contenido