Operating The Appliance; Switching On; Switching Off; Intensive Setting - Gaggenau VL 200 120 Instrucciones De Uso

Operating the appliance

S witching on
O p e r a t i n g t h e a p p l i a n c e
Automatic mode, three fan settings, intensive mode
and the intermittent ventilation system
for extraction.
Push in the control knob and turn it clockwise to the fan
setting you require.
The illuminated ring behind the control knob will light
up.

Switching off

Turn the control knob anti-clockwise to position 0.

Intensive setting

Activate intensive mode if strong odours or large
amounts of steam are produced. In this mode, the
appliance operates at its maximum fan setting for a
short time. After approx. 6 minutes, the appliance will
automatically switch back to fan setting 3.

Switching on

Push in the control knob and turn it clockwise to the
position.
Intensive mode is activated. The illuminated ring behind
the control knob will go out briefly and then light up
orange. A signal tone will sound.
Note: Intensive mode runs for 6 minutes. Once this time
has elapsed, the appliance will switch back to fan
setting 3. A signal tone will sound. The control knob
Ž
remains in position . The illuminated ring behind the
control knob will go out briefly and then light up orange.
Switching off
Turn the control knob anti-clockwise to position 0.

Intermittent ventilation

With intermittent ventilation, the fan automatically
switches to fan setting 1 for 6 minutes every hour.
Switching on
Ž
μ
are available
Push in the control knob and turn it clockwise to the
position.
Intermittent ventilation is activated. The illuminated ring
behind the control knob will be lit orange while the
ventilation system is switched on.
Switching off
Turn the control knob anti-clockwise to position 0.

Automatic mode

In automatic mode, a sensor in the appliance detects
the intensity of the cooking and roasting fumes. The
appliance selects the appropriate fan setting
automatically.
Switching on
Push in the control knob and turn it clockwise to the
position.
Automatic mode is activated.
The optimum fan setting 1, 2 or 3 is set automatically
using a sensor. The illuminated ring behind the control
knob will be lit orange while the ventilation system is
switched on.
Automatic mode can run for a maximum of 8 hours.
Switching off
Turn the control knob anti-clockwise to position 0.
Ž

Saturation display

When the metal grease filter or the activated charcoal
filter (only in air recirculation mode) are saturated, a
signal sounds after the appliance has been switched off
and the illuminated ring on the control knob flashes:
▯
▯
Do not wait any longer to clean the metal grease filters
or replace or regenerate the activated charcoal
filters.~
Operating the appliance
Metal grease filter: 3 times white, slow flashing
Activated charcoal filter: 6 times white, rapid
flashing
"Cleaning and maintenance" on page 11
en
μ
<
9