Software Installation - i-tec MYSAFEM2 Manual De Instrucciones

Quick Start / MySafe USB 3.0 M.2 SSD External Case
4. Connect a USB cable to the case. Now the
device is ready for using.

SOFTWARE INSTALLATION

Windows 7/8/8.1/10 32/64bit or macOS 10.x and
higher.
After connecting the device to a computer,
detection and automatic installation of drivers
from the system will be performed.
Remark: The case surface can be warmed up
during operation. It is a usual operational feature
and doesn't mean a defect. This warming-up is
caused by cooling the electronics inside the case.
We recommend not covering the case by things.
Remarks: To ensure correct function of the device,
firstly it is necessary to format the disc. Proceed
according to the below mentioned instructions.
FORMATTING A NEW HDD
1. Click with the right button on „Desktop".
2. Select „Administrate".
3. Click on „Disc administration".
4. Select HDD with the marking „Unassigned" or
„Uninitialized" and with the specified capacity
of the inserted disc (usually a number lower
by same digit places is displayed).
5. Provided the disc is not initialized, click on
the left field by the right button and select
„Initialize disc".
6. Click with the right button on the area of the
disc and select „New simple bunch", click on
„Next".
7. Leave the maximum bunch size and click on
„Next".
8. Select „Assign a letter of the unit" and click
on „Next".
EN
7