Power Supply; Software Installation; Package Content; Frequently Asked Questions - i-tec MYSAFE CAMYSAFEDUALM2 Manual De Instrucciones

Ocultar thumbs Ver también para MYSAFE CAMYSAFEDUALM2:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15

POWER SUPPLY

In case that the case is not sufficiently powered by means of a USB-C port,
we recommend that you connect an extern 5V power source (it is not a part
of the package).

SOFTWARE INSTALLATION

Windows 7/8/8.1/10 32/64bit or macOS 10.x and higher
At connection of the device to a computer, detection and automatic
installation of the drivers from the system will be performed.
Remarks: At operation, the case surface can be heated up. This is a usual
operating feature and is not a defect. This way, the electronics are being
cooled. We recommend that you not cover the case by things.
Remarks: For correct function of the device, firstly it is necessary to format the
new disk Proceed according to the below mentioned instructions. As far as the
disk was earlier used, then this might not be a necessity. By formatting, you
will always lose your already saved data.
Remark: We recommend that you save essential or valuable data on more than
one disks or other recording media.
NEW HDD FORMATTING
1. Click the right mouse button on "My Computer".
2. Select "Manage"
3. Click on "Disks Management"
4. Select HDD described as "Unallocated" or "Uninitialized" with a specified
capacity of the inserted disk (usually, a number with a few digit values
lower is being displayed).
5. As far as the disk is not initialized, click the right mouse button on the left
field and select "Initialize Disk".
6. Click the right mouse button on the disk area and select "New Simple
Bunch", click on "Next".
7. Leave the bunch size on the maximum and click on "Next"
8. Select "Allocate a Letter to the Unit" and click on "Next".
9. Select "Format the Bunch with the Following Setting" (leave the initial
setting). Click on "Next" and "Finish".
10. HDD formatting will be performed. The formatting time depends on the
HDD size. Afterwards the HDD is visible in the system.

PACKAGE CONTENT

• Extern case for a M.2 disk
• USB-C cable with a length of 45cm
• USB-C to USB 3.0 cable with a length of 45cm
• Screw-driver
• Screws
• Rubber legs
• User manual

FREQUENTLY ASKED QUESTIONS

Available on our website www.i-tec.cz/en/ on the "FAQ" tab of this product.
ENGLISH
Quick Start
ENGLISH
| 7

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mysafe usb-c / usb 3.0 2xCamysafedualm2

Tabla de contenido