SentrySafe Fire-Safe Chests Manual Del Usuario página 3

Waterproof Protection
(F and H Series Models Only)
SentrySafe waterproof products have been tested by the
independent testing firm ETL Semko and found to be in compli-
ance with the following standard for waterproof submersion:
With respect to a closed product with the latch fully engaged,
when completely submerged in up to 2 inches of water above
the uppermost surface for a duration of one hour, no more
than 0.5 grams (8 drops) of water enter the product.
NOTE: All waterproof models must be closed with the latch fully
engaged to minimize any water invasion.
Lifetime After-Fire Replacement Guarantee
If this product is damaged by fire at any time while still owned by
you (the original owner), Sentry Group will ship a replacement
free of charge, if you send the following to the Sentry office
nearest you (see back cover):
• Your name and address;
• A description of the fire, with the model number and a photo
of the burned unit.
Locating and securing this product
For maximum fire safety
Keep this product on the lowest secure floor in your home or
business. If a fire damages the flooring, there will be less
danger of injury to fire fighters below, or of damage to the
%
unit's contents.
To assure that the unit will perform properly in case of
fire, store it closed and locked, with the feet down. The front
plate where the model number appears, should be facing out,
not up.
Notice: Media Safes 1710 and 6720
Store the SentrySafe media chest or file in a cool, dry location.
Extended exposure to temperatures above 35ºC (95ºF) activates
the special insulation in your unit that protects the contents in
an actual fire. If activated prematurely, this insulation won't be
"fully charged," reducing its fire protective capability. If stored
in a cool place, the insulation will recrystalize, regaining the
maximum fire protection required for sensitive computer media.
To lock and unlock
Two keys are packed with the unit.
• To lock, insert the key (with the lid closed). Turn the key
one-quarter turn to the right. Remove the key and store it in
a secure place. (Fig. A)
• To unlock, insert the key and turn it one-quarter turn to the
left. (Fig. B)
A B
To install Model 6000
1. Open either drawer and notice three slot holes on each side.
2. Place one end of a rail in the front right slot, then push to
snap the other end into the front left slot. (Fig. C)
3. Place another rail in the rear set of slots.
A4 hanging file folders will now fit in the drawer between the
two rails.
C
Latch and lock operation for
waterproof chests and files
(F and H Series Models Only)
To unlock and open:
1. Insert key in lock and turn counterclockwise.
2. While pressing down on lid with one hand, squeeze latch
button with the other hand to open product. (Fig. D)
To use latch feature:
1. Close and press down on lid to engage latch. (Fig. E)
2. Product can now be transported without locking it.
To close and lock:
1. Close and press down on lid to engage latch.
2. Insert key in lock and turn clockwise to lock product.
D E
%
To open waterproof models which
have been submerged in water:
1. Remove the unit from water.
2. Dry the exterior of the product with a paper towel, taking
care to remove water droplets from around the opening.
3. Remove any excess water from in between the lid and
the base.
4. Open the lid slowly; there may be a few droplets of water
on the gasket. If so, dry with towel.
WARNING!
Keys could potentially be locked inside unit. To
avoid this, do not open and place keys inside unit
before relocking!
WARNING!
Not for weapons storage.
This product is not intended for nor recommended for the
storage of firearms, ammunition, explosives, explosive devices
or weapons. Sentry Group disclaims any responsibility or liability
for any damage or injury resulting from the storage of these
%
items in this product.
Protect delicate items!
The inside of the unit is subject to humidity. If you are storing
stamps or other delicate items which may be affected by
%
moisture, keep them in an airtight container.
Sorry, no pearls.
Pearls may become discolored from exposure to heat.
If you lose your keys
Contact your local SentrySafe distributor for assistance in
obtaining replacement keys.
NOTE: The distributor may charge for this service.
3