emergency power down box
Store the power down box in a convenient location for emergency use.
(2) 9 Volt batteries are required to operate the power down feature and are NOT included.
In the event that the base is stuck in an articulated position during a power outage-
The Power Down Box can only be used to bring the base to a flat position.
It will not bring the base to a flat position when the base is connected to a working power source.
STEP 1
Locate the Power Down Box under the base.
STEP 2
Press and hold the button until the base is flat.
Note: The button can be pressed at any time during the loss of power to bring the base flat.
10
FOR EMERGENCY USE ONLY.
the Power Down Box will return the base to a flat position.