Fault-Tracing; Ordering Spare Parts - ESAB COOL 2 Manual De Instrucciones

GB
7

FAULT-TRACING

Try these recommended checks and inspections before sending for an authorized
service technician.
Error code
Poor cooling effect
8

ORDERING SPARE PARTS

Repair and electrical work should be performed by an authorised ESAB service
technician. Use only ESAB original spare and wear parts.
The COOL2 is designed and tested in accordance with International standard IEC 60974­2,
Canadian standards CAN/CSA-E60974-1 and US standards ANSI/IEC 60974-1.
On completion of service or repair work, it is the responsibility of the person(s) performing
the work to ensure that the product still complies with the requirements of the above
standard.
Spare parts may be ordered through your nearest ESAB dealer, see the last page of
this publication.
bk12de
Corrective action
Clean the cooling element using compressed air.
Check the coolant level.
Check that the on/off switch on the cooling unit is set to ON.
- 25 -
© ESAB AB2013