Bella 13867 Instrucciones De Funcionamiento página 5

5. To assemble for grinding or whipping,
using the blade's collar to handle,
place the grinding (flat) blade into the small
grinding cup.
IMPORTANT: Check to make sure the cup
ring is not attached to the blending cup before
assembling the blade. If it is, simply lift off
to remove.
IMPORTANT: In the base of each blade's collar,
there is a plastic gasket seal that creates
an airtight fit with the Rocket processing cups.
After dishwashing and before each use,
always check to make sure the gasket
is properly in place, as the heat from some
dishwashers may cause the gasket
to become loose.
WARNING: Never operate the Rocket Blender
when the processing cup is empty.
WARNING: Never overfill the processing cup. Do not exceed the MAX line.
6. Hold the cup (tall or small) firmly in one hand. Use the other hand to tighten
the cup/blade assembly by turning the blade collar clockwise until snug.
7. Plug the power cord into a 120V AC electrical outlet.
8. Invert the processing cup/blade assembly. Insert the blade collar into the motor base,
fitting the tabs into the slots on the motor base.
NOTE: The Rocket Blender will not operate unless the 3 locking tabs on the blade collar
are properly fitted into the 3 slots on the motor base.
5