Operation; Switching On And Off; Comb Attachment; Cleaning And Care - Wella Professionals contura Manual De Instrucciones

Contura.book Seite 29 Freitag, 6. Januar 2012 1:01 13

3 Operation

3.1 Switching On and Off

– To switch the appliance on,
slide the On/Off switch 4 for-
ward.
– To switch the appliance off,
slide the On/Off switch to posi-
tion 0.

3.2 Comb attachment

– Switch off the Contura and
slide the comb attachment
onto the blade head until it
snaps into place.
– You can now start trimming
hair with the Contura in the
usual way.
– The comb attachment can be
adjusted to 4 different cutting
lengths (approx. 3 to 6 mm).
To do so, push it to the
required position on the blade
head.
The further you push the comb attachment onto the
blade head, the shorter the cutting length.

4 Cleaning and care

To ensure proper functioning and full performance
from your Contura, clean and oil the appliance regu-
larly.
Cleaning the blade head
If used regularly, the blade head 5 should be thor-
oughly cleaned once a day.
– Switch the appliance off.
– Remove the comb attachment if fitted.
– Use the cleaning brush 12 to remove any hairs.
29