Seliger FOGSTAR 600 Instrucciones De Uso página 11

INSTALLATION
There are two ways of installing the FOGSTAR 600: floating and standing (see diagram). First of all, place the
pond vaporizer in your garden pond or fountain so that the water at least covers the water level control sensor.
The FOGSTAR 600 functions best if the upper part of the water level control sensor is 5 - 30 mm under water.
If used in a garden pond or in larger water containers, we recommend you use the matching floating ring, which
ensures that the water level above the water level control sensor remains constant and perfectly suited.
Floating in a buoyant ring
In order to put the vaporizer into operation, please connect the components as follows:
Once the vaporizer and switch have been correctly connected, insert the mains plug into its designated socket.
As soon as the water level falls below the minimum level of the water level control sensor, the FOGSTAR 600
automatically deactivates.
Fixed in a spring stone or the course
of a stream
ENGLISH 11