Dismantling, Transport And Storage; Dismantling; Transport And Storage - Superior RM5 Manual De Instrucciones

10/2018
4
5
6

6. Dismantling, transport and storage

6.1 Dismantling

1. Switch off the instrument by means of the rocker switch.
2. Disconnect the instrument from the mains.
3. Now you can remove the instrument from the working area.

6.2 Transport and storage

Place the instrument and its parts in its original packaging or in a suitable container.
Protect each module by means of bubble wrap against mechanical shocks from
the outside. When packing the individually packed modules in one carton, make
sure there are sufficient gaps between them and fill out the gaps with insulating
material. In case you do not use the original packaging, please mark the box with
the following notes:
● Glass symbol (Fragile! Handle with care!)
● Umbrella (Keep dry!)
● Content (List of content)
For proper storage please take note of the following instruction:
Paul Marienfeld GmbH & Co. KG
Am Wöllerspfad 4
97922 Lauda-Königshofen, Germany
Tax number: 8028008501
VAT reg. no.: DE 811 479 105
3
4
1
2
Phone: +49 (0) 9343 6272-0 Deutsche Bank Würzburg
Fax: +49 (0) 9343 6272-25 IBAN: DE95 7907 0016 0130 0888 00
info@marienfeld-superior.com
SWIFT: DEUT DE MM 790
www.marienfeld-superior.com
e. When replacing the rolls please follow
steps a to c.
f. Then push the conical part of the roll
(1) into the borehole of the drive disk
(2). Now rotate the roll axial until the
drive piece (3) clicks into the slot of
the drive disk (4).
g. Take care that the rolls are
completely inserted into the drive disk.
h. Close the coverage with the knurled
head screw. Take care that the
coverage is completely closed.
Commercial Register Mannheim HRA 550306, personally liable
partner: Marienfeld-Verwaltungs-GmbH, 97922 Lauda-Königshofen
Commercial Register Mannheim HRB 560548, Managing Directors:
Gerd Marienfeld, Harry Marienfeld
21