Velleman RCQC2 Manual Del Usuario página 11

8.3 3D Flight
After having fully mastered the basic manoeuvres and clocked up enough
flying hours, you can now do some spectacular aerobatics!
One of those stunts is the 3D flight or roll. To do so:
1. Keep your quadcopter hovering at a steady height of minimum 3 m.
2. Press the 3D flight button. Move the cyclic stick to the left, the right,
forward or backward.
3. You will now have completed a perfect 360° roll, left, right, forward or
backward according to your cyclic stick movement!
Only use the 3D flight with fully-charged quadcopter and remote
control batteries, and in an open-space area without obstacles.
8.4 Resetting the Quadcopter
1. Switch on the quadcopter: it should flash slowly and constantly. Place
it on a flat surface and step away a few metres.
2. Pull the throttle stick to its lowest position and switch on the remote.
The quadcopter will flash rapidly and beep, meaning it is linked to the
remote.
3. Push the throttle and cyclic sticks to the bottom-right corner until you
hear a double beep. Release the sticks.
9. Troubleshooting
No response from the quadcopter.
The battery of the quadcopter is insufficiently charged.
 Charge the battery.
The batteries of the remote control are insufficiently charged.
 Charge or replace the batteries.
The bandwidths of the remote control and the quadcopter do not
correspond.
 Choose the same bandwidth for both the remote control and the
quadcopter by resetting and synchronizing the remote control and
the quadcopter.
The blades spin but the quadcopter does not take off.
The battery of the quadcopter is insufficiently charged.
 Charge the battery.
The blades are distorted.
 Replace the blades.
V. 01 – 04/03/2016
RCQC2
11 ©Velleman nv