Applicable Types Of Enclosure / Standards - ProMinent DULCOMETER D2C Instrucciones De Servicio

7

Applicable Types of Enclosure / Standards

7 Applicable Types of Enclosure / Standards
7.1 Electric shock and moisture protection (IP)
D2C D: Device in installed condition: Type of enclosure DIN 40050 - IP 54
Device in sealed housing type of enclosure IP 65 in accordance with DIN VDE 0470 corresponding to
EN 60529 and IEC 529 outer seal (control panel installation) type of enclosure IP 54 in accordance with
DIN VDE 0470 corresponding to EN 60529 and IEC 529.
7.2 Electrical safety/interference suppression
EC low voltage guideline (73/23/EEC) consequently 93/44/EEC
EC EMC guideline (89/336/EEC) consequently 92/31/EEC being prepared
Supply voltage in accordance with DIN IEC 38
Electrical safety in accordance with EN 61010-1
Electromagnetic emitted interference in accordance with EN 55011 Gr. 1/Cl. B
Interference immunity in accordance with IEC 801-2, -3, -4 or DIN VDE 0843, Part 2, Part 3, Part 4 or
EN 50082-2
EN 60335-1 Safety of electrical devices for household use
EN 50081-1 EMC, emitted interference, residential areas
EN 50082-2 EMC, emitted interference, industrial areas
EN 60555-2 EMC, reactions in power supply networks, harmonics
EN 60555-3 EMC, reactions in power supply networks, voltage fluctuations
7.3 Test in moist changeable climate
D2C D: Permissible relative humidity: max. 80 % (condensation not permitted)
WARNING
The device is not suitable for use in a moist changeable climate as there is no sealed
housing and constant exchange of air!
D2C W: Moist changeable climate in accordance with FW DIN 50016
35