Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
WWW.PREMIERMUNDO.COM
CASSETTE OPERATION
PLAYBACK
1.
Select the FUNCTION switch to the "TAPE" position.
2.
Insert the cassette into the Cassette Compartment.
3.
Press the PLAY button to play a tape loaded.
4.
Adjust the VOLUME, if necessary.
5.
Press the STOP/EJECT button to stop the tape play.
*PAUSE button is used for temporarily stopping the tape during recording or playback.
FAST WINDING
1.
To fast forward or rewind, press Fast Forward or Rewind button.
2.
Press the STOP/EJECT button to stop fast winding as the tape ended, in order to prevent damage to the
cassette tape.
CASSETTE RECORDER OPERATION
RECORDING
Within Recording, no volume adjustment is necessary, recording level is automatically set.
CASSETTE TAPE SELECTION
The quality and condition of the cassette tapes used will have a direct effect on the performance of this unit.
Low quality tapes tend to break and stretch, and a broken tape can easily become en-tangled in the drice
mechanism, causing major damage. Stretched tapes will run at un-even speeds and will distort anything
recorded on them.
•
Use only well-known brands of tape.
•
Use of C-120 (120 minutes) cassettes is not recommended. The extreme thinness of this tape may result
in breakage or other problem.
•
Check to ensure there are no loose layers of tape visible through the cassette center windows. Tighten
these loose layers with a pencil or ball-point pen before inserting the cassette into the unit.
RECORDING FROM THE BUILT-IN RADIO
1.
Select the FUNCTION switch to "Radio" position.
2.
Set the Band switch to the desired band position.
3.
Turn in desired radio station.
4.
Insert the cassette into the Cassette Compartment.
5.
Press the PAUSE button.
6.
Press the RECORD button.
7.
Release the PAUSE button to begin recording.
8.
Adjust the VOLOUME, if necessary.
9.
To stop recording, press STOP/EJECT button. When the tape operate to the end recording will be stop
automatically.
Page 7
Publicidad
Tabla de contenido
