Cleaning The Drain Pump Filter - LG SIGNATURE LUWM101HWA Manual Del Propietário

46 MAINTENANCE
Cleaning the Drain Pump
Filter
The washer fails to drain if the drain pump filter is
clogged. Periodically clean the drain filter to prevent
clogging with foreign objects.
WARNING
• Opening the drain filter will result in water
overflowing if there is water in the washer drum.
Use a bucket if the drum is not completely
drained before you open the drain filter.
• Using the washer without the drain filter or with
an incorrectly assembled drain filter may cause
leaks or malfunctioning of the washer.
1
Turn off the machine and pull out the plug.
2
Press on the circle to open the lower cover
as shown below.
3
Unclip the drain hose and remove the plug
from the drain hose to drain the remaining
water.
Drain filter
4
Clean the pump filter and opening.
Twist the pump filter counterclockwise to
remove.
5
After cleaning, assemble the hose cap and
the pump filter in the original positions.
6
Close the lower cover.
NOTE
• An '[OE]' message blinks on the display when the
drain pump filter is clogged with dirt. Clean the drain
pump filter.
Container to
collect the
drained water.
Drain plug