Important; Tool Use And Care; Specific Safety Rules For Industrial Vacuums - Urrea AS810 Manual De Usuario

IMPORTANT: This appliance is not intended
for use by persons (including children) with re-
duced physical, sensory or mental capabilities
may be different or reduced, or lack of experi-
ence or knowledge, unless such persons are su-
pervised or trained to operate the product by
a person responsible for their safety. Children
should be supervised to ensure they do not use
the devices as toys.

TOOL USE AND CARE

Do not force the power tool. Use the correct
tool for the application. The correct tool will
do the job better and more safely at the rate
that it was designed to work at.
Do not use tools if switch does not turn it on or
off. Any tool that cannot be controlled whith
the switch is dangerous and must be repaired.
Disconnect the plug from the power source
before making any adjustments, changing ac-
cessories or storing the tool. This preventive
safety measures reduce the risk of accidental
starting of the tool.
When the power tool is not in use, store it out
of the reach of children, and do not allow in-
dividuals who are not familiar with the power
tool or these instructions to operate it. Power
tools are dangerous in the hands on untrained
users.
Maintain the power tool. Check for misalign-
ment or binding of moving parts, broken
parts, and any other condition that may affect
the operation of the power tool. If it is dam-
aged, have it repaired before using. Many ac-
cidents are caused by poorly maintained power
tools.
Check for misalignment or bonding of moving
parts, breakage parts, and any other condition
that may affect the tools operation. If you find
a damaged tool, take it to service before use it.
Use only accessories that are recommended by
the manufacturer of your model. Suitable ac-
cessories for one tool, may become hazardous
when are used on another tool.
Keep cutting tools, sharpened and clean. Cut-
ting tools in good condition with sharpened
edges, are less likely to stuck in workpieces or
easier to control.
E N G L I S H •
Is recommendable to use a safety device suit-
able, such a thermal and diferential switch
when you are using an electric equipment.
SERVICE
Tool service must be perfomed only by quali-
fied repair personnel. Service or maintenance
performed by unqualified personnel could re-
sult in a risk of injury.
SPECIFIC SAFETY RULES FOR
INDUSTRIAL VACUUMS
ATTENTION: Read all safety rules carefully
before attempting to operate. Retain for fu-
ture reference.
DANGER: Never operate this unit when
flammable materials or vapors are present be-
cause electrical devices produce arcs or sparks
that can cause a fire or explosion.
NEVER OPERATE UNATTENDED!
When using an electrical appliance, basic pre-
cautions should always be followed, including
the following: READ ALL INSTRUCTIONS BE-
FORE USING THIS APPLIANCE.
WARNING: To reduce the risk of FIRE, elec-
tric shock OR INJURY;
1. Do not leave appliance when plugged in.
Unplug from outlet when not in use and be-
fore servicing. Connect to a properly grounded
outlet only.
2. Do not expose to rain – store indoors.
3. Do not allow to be used as a toy. Close at-
tention is necessary when used by or near chil-
dren.
4. Use only as described in this manual. Use
only Manufacturer's recommended attach-
ments.
5. Do not use with damaged cord or plug. If
appliance is not working as it should, has been
dropped, damaged, left outdoors or dropped
into water, contact service center for assis-
tance.
6. Do not: pull or carry by cord, use cord as
a handle, close a door on cord or pull cord
around sharp edges or corners. Do not run ap-
pliance over cord. Keep cord away from heated
surfaces.
7. Do not unplug by pulling on cord. To un-
plug, grasp the plug; not the cord.
U se r's m a nua l
13