Wash Cycles; Dishwasher Features & Options; Wash Cycle Options - Thermador DWHD630GCM Manual De Uso

8
Dishwasher Features & Options

Wash Cycles *

* The cycles listed below vary by models.
Auto Plus
Designed to be used with heavily soiled dishes as well as
pots and pans.
Auto
The sensors in the dishwasher automatically adjust the
cycle length, temperature and water changes based
on the soil load. This cycle contains additional sensor
decisions when compared to other cycles.
Delicate
Designed to be used with your fragile china and glassware,
allowing you to get it perfectly clean without the hassle of
hand washing or worry of damage in the dishwasher.
Normal
Thoroughly cleans large loads having loosely attached
normal soiling.
Quick Clean
Cleans lightly soiled dishes and reduces overall wash time.
Use this cycle to clean glasses and dessert dishes that may
need to be re-used at the same event.
Rinse Only
Allows you to rinse the food soil of of a partial load and
hold them in the dishwasher until there is a full load.
16

Wash Cycle Options *

* The options listed below vary by models.
Options can be used along with wash cycle to customize
load for personalized results:
1. Select wash cycle
2. Select option
3. Start dishwasher
Extra Dry Heat
With this option you can raise the temperature of the rinse
water and increase the drying time for improved drying.
NOTE: The unit must be powered OFF before activating.
To activate:
Press and hold the left "Cancel Reset" button, then
press and hold the ON/OFF button.
For units with a display when the LED display window
indicates a "0" or "1" release both buttons.
To activate extra dry heat, press the left "Cancel Reset"
button until the display indicates "1".
To disable extra dry heat, press the left "Cancel Reset"
button until the display indicates "0".
Press the ON/OFF button to save the setting.
Delay Start
This option allows you to delay the start time of your
dishwasher. To activate:
Turn the dishwasher on.
Select the desired wash cycle.
Press and hold the Delay Start button. Release
when the desired delay time is shown in the display
window.
EcoAction
This option saves energy by reducing the water
temperature.
Reset