Programming A Custom Library Location - AEMC Instruments CA7024 Manual De Instrucciones

4.5

Programming a Custom Library Location

To program a custom library location, enter the Set-up mode (see § 4.4).
Press the
TEST /
be at Edit Library.
Press the
Vp
• The Model CA7024 will display the first programmable cable loca-
tion in the library.
• The factory setting for each location is Custom Cable X with a Vp
= 50%, where X is location 1 through 15.
Press the
Vp
Next, press the
• The arrow cursor will point to the first character.
• Fifteen characters are available for cable naming.
Press the
Vp
respectively. Once the desired character is selected, press the
button to enter the Edit Character mode.
Next, press the
tion point.
Fault Mapper Model CA7024
button to select Edit Library; the line selector (>) should
or button to enter the library programming mode.
Vp
or button to choose a cable location to program.
Vp
--- Choose Cable ---
Custom Cable 1
Vp = 50%
button enter the Choose Character mode.
TEST /
--- Choose Character ---
Custom Cable 1
Vp = 50%
or button to move the selection cursor to the left or right
Vp
or button to change the character at the selec-
Vp Vp
TEST /
9