Waeco PerfectView CSMarine Instrucciones De Montaje página 20

RV-Marine-2.qxd 26.03.2004
Monitor
The 5.5" monitor displays a clear BW-image with a resolution of TV-lines. The operating
elements are easily accessible at the front of the monitor (see E 1). In addition to the
power input, the camera has 2 camera inputs and one video input or output connection
each (PAL), to connect a video recorder or a video camera (audio-connections without
function) (see E 3).
Voltage supply
The system does not include wiring. The wiring harness contains:
– 50 cm battery supply cable with 2-A fuse (see A 1.7)
– Mains charger 230 V, 600 mA, for charging the 4.5-Ah-battery (see A 1.5)
Caution! Wrong polarity (confusing the colours) causes damage to the
system!
Connect the red terminal of the power or charger adapter cable to the red pole (+) of the
battery. Proceed likewise with the black terminal. Disconnect the voltage supply when the
system is not in use in order to avoid excessive discharge of the battery.
Colour marking
Red = +12 V voltage
Black = earth/negative
Monitor
Take the monitor out of the bag and connect the cables.
Place the monitor on an even, stable and dry surface. A sun shield is included with the
monitor. This greatly improves the clarity of the image with strong solar rays. You can hold
it easily at the front of the monitor (see D 1).
Camera
Plug the camera cable into the input "C1" at the monitor (see E 3) and select the camera
"C1" with the switch at the front (see E 1).
11:40 Seite 20
Function overview
Installation
20