Introduction; General Safety Rules - Surtek SG530 Manual De Usuario Y Garantía

INTRODUCTION

Your unit has many features that will make
your job faster and easier. Safety, performance
and reliability have been given top priority in
the design of this tool, qualities to make easy
to maintain and to operate.
WARNING: Carefully read the entire man-
ual before attempting to use this tool. Make
sure to pay special attention to the safety rules
and indications, plus all the warnings and cau-
tions of this manual.

GENERAL SAFETY RULES

WARNING: Read and understand all in-
structions. Failure to follow all indications list-
ed below, may result in electric shock, fire and/
or serious personal injury.
SAVE THESE INSTRUCTIONS.
WARNING: When using the unit, basic safe-
ty precaution, including the following, should
always be followed to reduce the risk or seri-
ous personal injury and damage to the unit.
NOTE: Read all these instruction before oper-
ating this production and save this instruction.
Do not allow children or untrained individuals
to use the unit.
+ WHAT TO DO
READ YOUR USER MANUAL AND ALL SUPPLE-
MENTS (IF ANY ENCLOSED) THOROUGHLY BE-
FORE OPERATING YOUR UNIT.
1. WEAR CLOSE FITTING, TOUGH WORK
CLOTHING that will provide protection, such
as long slacks or trousers, safety work shoes,
heavy duty work gloves, hard hat, a safety face
shield, or safety glasses for eye protection and
a good grade of ear plugs or other sound bar-
riers for hearing protection.
2. REFUEL IN A SAFE PLACE. Open fuel cap
slowly to release any pressure which may have
formed in fuel tank. Always wipe unit of fuel
or oil spills before starting. To prevent a fire
hazard, move at least 10 feet (3 meters) from
fuelling area before starting.
3. TURN UNIT OFF before setting it down,
and also before installing or removing attach-
ments.
E N G L I S H •
4. KEEP ALL SCREWS AND FASTENERS TIGHT
and the unit in good operating condition.
Never operate this equipment if it is improp-
erly adjusted or not completely and securely
assembled.
5. KEEP HANDLES DRY, clean and free of fuel
mixture.
6. STORE EQUIPMENT AWAY FROM POSSIBLE
IGNITION SOURCES, such as gas-powered wa-
ter heaters, clothes dryers, or oil-fired furnaces,
portable heaters, etc.
7. ALWAYS KEEP the engine free of debris
build-up.
8. OPERATION OF EQUIPMENT should always
be restricted to mature and properly instructed
individuals.
9. ALL PERSONS WITH RESPIRATORY PROB-
LEMS and persons operating blower in very
dusty environments, should wear a dust par-
ticle mask at all times. Paper dust masks are
available at most paint and hardware stores.
10. Operate the machine only at reasonable
hours- not early in the morning or late at night
when people might be disturbed. Comply with
times listed in local ordinances.
11. Operate the machine at the lowest possible
engine speed to do the job.
12. Use rakes and brooms to loosen debris be-
fore blowing.
13. In dusty conditions, slightly dampen sur-
faces.
14. Use the full blower nozzle extension so the
air stream can work close to the ground.
15. Watch out for children, pets, open win-
dows etc. and blow debris safely away.
+ WHAT NOT TO DO
1. DO NOT SMOKE while refuelling or operat-
ing equipment.
2. DO NOT OPERATE UNIT WITHOUT A MUF-
FLER and properly installed muffler shield.
3. DO NOT TOUCH or let your hands or body
come in contact with a hot muffler or spark
plug wire.
4. DUE TO THE DANGER of exhaust fumes,
never operate blower in a confined or poorly
ventilated area.
5. NEVER POINT BLOWER in the direction of
people, animals, buildings, automobiles, or
windows, etc.
6. DO NOT operate unit without inlet cover in-
stalled to prevent contact with impeller.
U ser' s manual
9