Rear Panel - Phonic DYN2000 Manual Del Usuario

22

REAR PANEL

18. Channel 1 and 2 Inputs
These balanced xLR and 1/4" TRS phone jack connectors are for
the input of signals to the DYN2000. Please note that only one of
these inputs should be used on each channel at any one time.
19. Channel 1 and 2 Outputs
These balanced xLR and 1/4" TRS phone jack connectors are for
the output of already processed signals from the DYN2000. Unlike
the input jacks, all of these outputs can be used simultaneously.
20. Operating Level Select Switch
This switch swaps the input and output levels of the corresponding
channel between -10 dBV (consumer level) and +4 dBu
(professional level).
DYN2000
19 20
21. Sidechain Insert Points
This 1/4" TRS connector allows users to send and receive signals
to and from external processors using a special y-cord (see
diagram). This allows users to apply additional effects to their
signals. Pushing the sidechain button (see point number 2) on
one or both channels will make use of the unit connected to the
corresponding sidechain insert.
22. AC Power Cable Receptacle and Power Switch
This is a standard AC receptacle that accepts IEC-type power
cords. We suggest using the cord provided along with this unit
only, and be sure to check local voltage levels before connecting
the cord. The accompanying power switch will turn the DYN2000
on and off when power is supplied to the unit.
18 21
7