Specification - Phonic DYN2000 Manual Del Usuario

SPECIFICATIONS
INPUT
Connector:
Impedance:
Maximum Level:
CMRR:
SIDECHAIN INSERT
Connector:
Impedance:
Maximum Level:
OUTPUT
Connector:
Impedance:
Maximum Level:
Frequency Response:
Noise:
THD + N:
SMPTE IMD
COMPRESSION
Threshold Range:
Threshold Characteristic:
Compression Ratio:
Attack Time:
Release Time:
EXPANDER/GATE
Threshold Range:
Expansion Ratio:
Maximum Depth:
Attack Time:
Release Time:
SYSTEM
Limiter Threshold Range:
Gain Adjustment Range:
Interchannel Crosstalk
Dynamic Range:
POWER
Power Consumption:
Operating Temperature:
PHYSICAL
Dimensions:
Weight:
Note: 0dBu = 0.775Vrms
Note: Specifications subject to change without notice.
8
1/4" TRS and xLR, Floating Balanced; xLR: Pin 2 hot Phone: Tip Hot HI
>50kΩ balanced, >25kΩ unbalanced
+24dBu, Balanced or Unbalanced
>40dB at 1kHz, typically >55dB
1/4" TRS Phone, Normalled:Ring = Ouput (send); tip = Input (return)
Tip = >10kΩ (Input), Ring = 2kΩ (Output)
+24dBu
1/4" TRS phone and XLR floating balanced, XLR: Pin 2 and Tip Hi
120Ω balanced, 60Ω unbalanced
+21dBu,>+20 dBm into 600Ω, balanced or unbalanced
20Hz - 20kHz; +0, -0.5dB,Typical 3dB points are 0.35Hz and 110kHz, unity gain
<-90dBu, 22Hz to 22kHz, no weighting, unity gain
Typically <0.04%; Any Amount of Compression Up to 40dB@1kHz
Typically <0.08% @ +10dBu (15dB Gain reduction)
-40dBu to +20dBu
Selectable easy or hard knee
Variable; 1:1 to Infinity:1; 60dB Maximum Compression
Variable program-dependent; 3ms to 340ms for 15dB gain reduction
Variable program-dependent; 200dB/Sec to 3dB/Sec
OFF to +15dBu
10:1
>60dB
<500µs (from Maximum Depth)
Adjustable, 30ms to 3sec (to 30dB attenuation)
0dBu to +20dBu
Variable; -20dB to +20dB
<-80dB, 20Hz to 20kHz
>115 dB
15 Watts Maximum
0°C to 45°C (32°F to 113°F)
1.7" x 19" x 7.2" (4.4 cm x 48.2 cm x 18.3 cm)
Net weight: 5.05 lb (2.29 kg)
Shipping weight: 7.20 lb (3.27 kg)
DYN2000