How To Charge - Axess SPBT1066 Manual De Usuario

FM RADIO
• Turn the power button to "ON", press the "MODE" button to FM radio state.
• Under playing mode, short press "PAUSE/PLAY" buttons to auto search the
FM Channel and store it automatically.
• Press "PREVIOUS SONG" or "NEXT SONG" buttons to change the stored
FM channel.
AUX-IN
• For other compatible music devices or your MP3/MP4 players, use the supplied
audio line cable to connect from the device's "Line Out" to the "Aux In" of this
device to Enjoy playing music.
• Under any playing mode, when you use the audio cable to connect the device,
it will auto switch to the AUX mode.
• Under AUX mode, all functions can be controlled by external device.
MIC FUNCTION
When speaker is power on, plug in the wired microphone to the appropriate
•
microphone input and it should begin to work automatically.
Use the MIC volume knob to raise and lower the microphone volume
•
REMARKS
Press the "MODE "button to switch the different modes, the order is Bluetooth,
•
USB disk, Micro SD, FM radio and AUX-IN.
Turn the power button to "OFF" to cut off the power supply while without use.
•

HOW TO CHARGE

Please use a standard 5V charger to charge this device. Put the provided charging
•
cable into the charging jack, connect the other end to the charger, the charging
indicator will light up and will continue to stay lit as it charges.
IMPORTANT
When playing music during charging, please put the volume to mid-level,
•
because for some music with heavy bass, the charger may not afford the high
current temporarily under the maximum volume.
Charge time should be 3-4 hours. When charging full, the indicator light will
•
switch off.
For first time use fully charge the device until the light indicator turns off. This can
•
take up to approximately 8 hours to fully charge. If you don't, the device will not
function at full capacity.
NOTE
When speaker is not in use please turn off the device to conserve battery life. Make
sure to turn down the volume when you turn off the device so you can maintain the
speakers' (sub)woofer in good condition. This way you are less like to burn out or
damage the device.