Installing The Dedicated Software; Installing The Windows Driver - Tascam Celesonic US-20x20 Manual Del Usuario

Installing the dedicated software

To use this unit with a computer, dedicated software must be
installed on the computer.
Download the latest software for the operating system you are
using from the TEAC Global Site (http://teac-global.com/).
0 To use this unit with a Windows computer, install the
Windows driver.
When you install the Windows driver, the Windows Settings
Panel application will be installed at the same time.
0 To use this unit with a Mac, install the Mac Settings Panel
application.
The standard OS driver will be used.
0 When using this unit with an iOS device, the standard OS
driver will be used, so there is no need to install dedicated
software.
CAUTION
Before starting to installer software, quit other applications.

Installing the Windows driver

CAUTION
• Complete installation of the Windows driver on the
computer before connecting the unit to it with the USB
cable.
• If you already connected the unit to the computer using
the USB cable before installing the Windows driver and the
Found New Hardware Wizard launched, close the message
and disconnect the USB cable.
Windows driver installation procedures
8
1. Download the latest Windows driver for the operating
system you are using from the TEAC Global Site (http://
teac-global.com/) and save it on the computer to be used
with the unit.
2. Open the saved Windows driver (zip file) on, for example, the
computer desktop.
3. Double-click the "US-20x20_Installer" file in the folder that
appears after uncompression to automatically launch the
installation software.
4. When a "Security Warning" or "User Account Control" screens
appear, click the "Yes" button.
5. When the InstallShield Wizard screen appears, click the "Next
(N)" button.
8
TASCAM US-20x20
6. Read the contents of the License Agreement, and select
"Agree (A)" if you agree to the terms.
Then, click the "Next (N)" button.
7. Click the "Install (I) button.
8. Next, click the "Install (I)" button to start installation.
9. The following screen appears when installation has
completed.
Click the "Finish (F)" button.
The installer will quit and the Windows Settings Panel will
launch.
NOTE
After installing the driver, the device driver will be installed
the first time the unit is connected by USB. At this time,
Windows will automatically search Windows Update, and
it may take some time to recognize the unit connection.
If the unit is still not recognized after some time, open the
software installation screen from the message area at
the bottom right of the computer display, and click "Skip
Obtaining Drivers From Windows Update" to cancel the
search.