Before Testing; Calibration; How To Code Your Meter - ForaCare GD40 Manual Del Usuario

BEFORE TESTING

Calibration

You must calibrate the meter every time you begin to use a new vial of
test strips by setting the meter with the correct code. Test results may
be inaccurate if the code number displayed on the monitor does not
match the number printed on the strip vial.

How to Code Your Meter

Step 1
Insert the code strip when the
meter is off. Wait until the code
number appears on the display.
Make sure the code number on display, code strip, and test strip vial are the
same.
18
NOTE
03
Code