Setting Af And Ta/Tp; Selecting Pty - Sony CDX-GT700D Manual De Instrucciones

Setting AF and TA/TP

1
Press (AF/TA) repeatedly until the
desired setting appears.
Select To
AF on activate AF and deactivate TA.
TA on
activate TA and deactivate AF.
AF/TA on activate both AF and TA.
AF/TA off deactivate both AF and TA.
Storing RDS stations with the AF and
TA setting
You can preset RDS stations along with the AF/
TA setting. If you use the BTM function, only
RDS stations are stored with the same AF/TA
setting.
If you preset manually, you can preset both RDS
and non-RDS stations with the AF/TA setting for
each.
1 Set AF/TA, then store the station with BTM or
manually.
Presetting the volume of traffic
announcements
You can preset the volume level of the traffic
announcements so as to not miss hearing them.
1 Rotate the volume control dial to adjust the
volume level.
2 Press and hold (AF/TA) until "TA Vol"
appears.
Receiving emergency
announcements
With AF or TA on, the emergency
announcements will automatically interrupt the
currently selected source.
Staying with one regional
programme — Regional
When the AF function is on: this unit's factory
setting restricts reception to a specific region, so
you will not be switched to another regional
station with a stronger frequency.
If you leave this regional programme's reception
area, set "Regional off" in menu (page 17).
Note
This function does not work in the UK and in some
other areas.
10
Local Link function (UK only)
This function enables you to select other local
stations in the area, even if they are not stored on
your number buttons.
1 During FM reception, press a number button
((1) to (6)) on which a local station is stored.
2 Within 5 seconds, press again a number button
of the local station.
Repeat this procedure until the local station is
received.

Selecting PTY

1
Press (MENU) during FM reception.
2
Press (GP/ALBM) +/– repeatedly until
"PTY" appears, then press (ENTER).
The current programme type name appears if
the station is transmitting PTY data.
3
Press (GP/ALBM) +/– repeatedly until
the desired programme type appears.
4
Press (ENTER).
The unit starts to search for a station
broadcasting the selected programme type.
With the card remote commander
In steps 1 and 2: press (PTY) instead of (MENU) and
(ENTER); in step 3: press M or m instead of
(GP/ALBM) +/–.