Operating Precautions - Brother MPRINT MW-120 Manual Del Usuario

Operating precautions

Operate this printer in an environment that meets the follow-
ing requirements.
Temperature: 32 – 104 °F / 0 – 40 °C
Humidity: 20 – 80 % (Maximum wet-bulb temperature: 80.6 °F/
27 °C)
Do not operate or store this printer in a location exposed to
extremely high or extremely low temperatures, extreme
humidity, extreme dust, or extreme vibrations, otherwise
the printer may be damaged or malfunction.
Do not use the printer in a location exposed to extreme tem-
perature fluctuations, otherwise condensation may occur,
resulting in the printer being damaged or malfunctioning.
If condensation occurs, allow it to dry naturally before
operating the printer.
The AC adapter case and the printer may become hot while
the printer is charging or printing. This does not indicate a
malfunction.
When the printer is not used, unplug the power supply plug
from the electrical outlet.
Do not block the paper output slot.
If the AC adapter connector or USB port becomes dirty, incor-
rect connection or incorrect charging may result. Periodically
clean the connector and port with a dry cotton swab.
When cleaning the printer, use a soft, dry cloth. Do not use
benzene or paint thinners, otherwise the printer may become
discolored or deformed. (
When using optional accessories, use them as described in
their instruction manuals.
Use thermal paper with this printer. If printed text is written
over or stamped, the text may disappear or become discol-
ored. In addition, it may take some time for the ink to dry.
Do not touch the printer with wet hands.
Do not leave paper cassette cover open when storing as this
may cause paper misfeeding or a paper sensor error.
→
Refer to page 13.)
Precautions
xi