Step 11: Assemble Dome; Step 12: Attach Dome; Step 13: Insert Battery - Blue Rhino GWU511A Manual Del Usuario

Contact 1.800.762.1142 for assistance.
Do not return to place of purchase.

Step 11: Assemble Dome

Note: Each dome section has a pin mounted in the rolled bottom edge. If necessary for
proper alignment of dome sections, loosen each screw prior to assembly.
A. Slide dome rib onto pin side of dome panel.
B. Slide two dome panels togther. Secure with small screw (A).
C. Repeat procedure for all three dome panels.
D. Insert dome bolt (F) through dome plate, dome, top dome plate, large nut (J).
E. Tighten all screws on dome panels.

Step 12: Attach dome

A. Attach dome to emitter using 3 medium nuts (I).
B. Attach dome cap to dome assembly using finial.

Step 13: Insert Battery

A. Remove battery cap.
B. Insert 1 AA battery (P).
C. Replace battery cap.
11 Owner's manual: model GWU511A outdoor patio heater