Panacom STAGE SOUND SP-3120 Manual Del Usuario página 5

1 Antenna
2 Mode - select function for radio/wireless/usb
3 Recording function - recording the song in USB and card slot
4 Cycle - repeat single song
5 Previous - play previous song
6 Play/pause - play song and pause song
7 Next - play next song
8 Slot - read usb and card
9 Aux - aux in
10 Mic vol - microphone volume
11 Echo - echo volume
12 Bass - bass volume
13 Treble - treble volume
14 Ext dc in - connect external dc power
15 Volume - main volume
16 Plug - connect iram adaptor
17 Light - power on / off light
18 Switch - power on or off
19 Mic in - microphone plug
HoW listen Via Bt
1. Find the input knob on the front panel then put it to the USB/SD position
2. Find the button mode on the top panel until you hear two beeps indicating that the function
is active.
3. Active the BT function of your mobile and the search for new devices.
4. BT of its box and "BT". To find this name in the list of devices face pairing.
5. Now and only load and play your favorite songs.
near range connection (nrc)
When you touch the system with an NRC-compatible smartphone, the system automatically:
- Turns on in wireless function.
- Completes pairing.
- Completes the wireless connection
1. Turn on the unit and switch to WI mode, the wireless light flashing.
2. Turn on the NRC function in your smartphone setting.
3. Touch the smartphone to the NRC mark on the control panel until the smartphone vibrates.
When the wireless connection is established, the wireless indicator stops flashing and remains light up.
Remark: The unit should have been connected with the smartphone by wireless connection
before using the one touch (NRC) function. For details, refer to the operating instruction of
wireless connection.
Pg. 5