Beta 599DGT-AN/10 Manual De Uso E Instrucciones página 20

OPERATION MANUAL AND INSTRUCTIONS
Peak hold mode operation
((...((...
((((((((
Note:
1. If appears, that means more than 110% of torque as stated in the specifications has
been applied to this wrench.
2. If the memory is full, the new data will overtype the stored data. Please see section "SETTING SUBMENUS" to learn how to delete
stored data.
3. When 80% of the target torque value is reached, the green LED will start blinking, and an intermittent sound will be heard.
4. When 99.5% of the target torque value is reached, a continuous sound will be heard, and the green LED will stop blinking and will
remain on. The red LED will also turn on.
20
START
INIZIO
(System initialization)
* Note 1
Set torque value
Applying torque
Released
Apply torque
Current torque
value
(Peak Hold)
Reaching 80% of target torque
...))...)) ((...((...
Buzzer
Reaching target torque
))))))))
Buzzer
* Note 2
Record
M
Flashing
* Note 3
...)) ...))
Green LED
80% of target torque reached
* Nota 4
((((((( )))))))
Red LED
Target torque reached
EN