Ecler DP 300 Manual De Instrucciones página 22

4. Equalizer width
The Wd parameter sets the filter bandwidth for the bell-type filters. It is only available for this type of
equalizer.
IN A
Eq1 Wd 0.300ct
The filter width can be adjusted from 0.05 octaves to 3 octaves in 0.05 octave steps.
The Width setting establishes the filter amount around the centre frequency. The smaller the Wd value,
the narrower the filter bell shape, so that a certain frequency can be affected more selectively. As the
Wd value is increased, the bell shape widens and a smoother filter response is obtained which affects
the adjacent frequencies increasingly.
It's usual to employ values around Wd=0.3 (1/3 octave)
At this point, a first equalization for this input has been created.
If the current channel has more than one active equalizers, pressing the PREVIOUS button brings you to
initial screen (equalizer type) of the second equalizer. This repeats successively until all input
equalization blocks have passed.
22