Sony HT-CT390 Manual De Instrucciones página 9

About the standby mode
The subwoofer enters standby mode
automatically and the power indicator
turns red when the Bar Speaker is in
standby mode or wireless transmission
is deactivated. The subwoofer turns on
automatically when the Bar Speaker is
turned on and wireless transmission is
activated.
Remote control
 INPUT (page 10)
  (power)
Turns on the system, or sets it to
standby mode.
 DIMMER
Adjust the brightness of the top
panel display.
"BRIGHT"  "DARK"  "OFF"
• The top panel display is turned
off when "OFF" is selected. It
turns on automatically when
you press any buttons, then
turns off again if you do not
operate the system for several
seconds. However, in some
cases, the top panel display
may not turn off. In this case,
the brightness of the top panel
display is same as "DARK".
 MENU
Turns on/off the menu in the top
panel display.
/
Selects the menu items.
ENTER
Enters the selection.
BACK
Returns to the previous display.
Stops USB playback.
  (volume) +*/–
Adjusts the volume.
 SW  (subwoofer volume) +/–
(page 22)
Adjusts the volume of bass
sound.
  (muting)
Turns off the sound temporarily.
 CLEARAUDIO+
Automatically selects the suitable
sound setting for the sound
source.
 SOUND FIELD (page 12)
Selects a sound mode.
 VOICE (page 12)
9
US