Settings And Adjustments; Using The Setup Display - Sony HT-XT100 Manual De Instrucciones

Settings and Adjustments

Using the setup display

You can set the following items with the menu.
Your settings are retained even if you disconnect the AC power cord (mains lead).
1
Press MENU to turn on the menu on the front panel display.
2
Press BACK/  (select)/ENTER repeatedly to select the item and press ENTER
to decide the setting.
3
Press MENU to turn off the menu.
Menu list
The default settings are underlined.
Menu items
[LEVEL] [DRC]
(Level) (Dynamic range
control)
[TONE] [BASS]
(Tone) (Bass)
[TRE]
(Treble)
[AUDIO] [DUAL]
(Audio) (Dual mono)
[TV AU]
(TV audio)
[EFCT]
(Sound effect)
[STRM]
(Stream)
Function
Useful for enjoying movies at low sound volume. DRC
applies to Dolby Digital sources.
• [ON]: Compresses sound in accordance with the
information contained in the content.
• [OFF]: Sound is not compressed.
Adjusts the bass level.
• The parameters range from [–6] to [+6] in 1-step
increments.
Adjusts the treble level.
• The parameters range from [–6] to [+6] in 1-step
increments.
You can enjoy multiplex broadcast sound when the system
receives a Dolby Digital multiplex broadcast signal.
• [M/S]: Main sound is output from the left speaker and sub
sound is output from the right speaker.
• [MAIN]: Outputs only the main channel.
• [SUB]: Outputs only the sub channel.
• [HDMI]: Select this setting when the system is connected
to an HDMI (ARC) jack of a TV with an HDMI cable.
• [OPT]: Select this setting when the system is connected to
a TV with the optical digital cable.
• [ANALG]: Select this setting when the system is connected
to a TV with an audio cable.
• [ON]: The sound of the selected sound field is played. It is
recommended to use this setting.
• [OFF]: The input source is down-mixed for 2 channels.
Shows the current audio stream information.
• [LPCM]: L PCM
• [DOLBY D]: Dolby Digital
• [NO INFO]: No audio format information
11
GB