Control Panel; Washing A Load Of Laundry - Black+Decker BPWM16W Manual De Instrucciones

ENGLISH
SET UP & USE

CONTROL PANEL

10 9 8 7
1. On/Off
Press the On/Off button once to turn ON the power to the washer. Press again to
turn OFF the unit.
2. Start/Pause
Press Start/Pause button once to start the wash cycle. Press again during
operation to PAUSE the cycle. Press again to continue the cycle.
3. Extra Rinse
Press the Extra Rinse button to select an additional rinse cycle.
4. Program
Press the Program button to select from the following:
Normal (light) Quick (Flash)
Heavy (light) Bulky (Flash)
Delicate (light) Spin Only (Flash)
5. Control Lock
Use this option to disable the controls. This feature can prevent children from
changing cycles or powering off the machine. The washer can only be locked
during a cycle. To activate this function after starting the washer, press and hold
the Temp and Program buttons at the same time. The control lock indicator light
will turn on. To cancel this function select the Temp and Program buttons again.
6. Temperature
Press this button to select the water temperature for washing Cold, Warm or Hot
temperature selections.
7. Load Size
Press Load Size to select Small, Medium or Large. This will determine the water
level throughout the wash cycle
8. Delay
You can delay the start of the wash cycle up to 24 hours. Activate Delay by
pressing the button to add 1 hour to the start time each time you press the
button. The digital display will show the amount of hours remaining until the wash
cycle is programed to start.
9. Digital Display
The digital display will show and count down the estimated minutes for the wash
cycle selected. If delay start is set, the display will indicated the amount of hours
until the wash cycle is to begin.
10. Procedure
Press this button to select different cycles: Soak, Wash, Rinse and Spin. The light
will illuminate next to the selected cycles or combination of cycles.
Page 20
6 5 4 3 2 1
SET UP & USE
WARNING
To reduce the risk of electric shock, or injury to persons, read the
important safety instructions before operating this appliance.

WASHING A LOAD OF LAUNDRY

Step 1: Power on your washer
Press the ON/OFF button to power your washer on.
ON/OFF
Step 2: Load your washer
Before loading your laundry, be sure to take out coins, keys
and other hard objects, and close all zippers to prevent the
clothes from damage.
Sort laundry by fabric type, soil level, color and load size as needed.
You can fill the tub with dry, unfolded clothes ,but DO NOT OVERLOAD
the tub. Load the tub no more than 3/4 full.
To ensure good cleaning results do not overload the tub, especially when washing
heavily soiled loads. Never load the tub more than 3/4 full.
Overloading may reduce washing efficiency, cause excess wear, and possibly
cause creasing or wrinkling of items in the load.
NOTE: To add a forgotten item:
1. Press the START/PAUSE button to pause the washer.
2. Wait for the tub to stop turning, then open the door.
3. Add the item, close the door, and then press the START PAUSE button. The cycle
will resume.
Step 3: Add detergent
This washer is designed for high efficiency (HE) detergent only.
Add the recommended amount of detergent directly into the
detergent compartment before starting your washer. The normal
amount of detergent to use is 1/4 to 1/2 of the maximum amount
recommended by the detergent manufacturer. Always reduce the
amount of detergent if the load is small or lightly soiled, or if your
water is very soft . Never use more than the maximum amount
recommended by the detergent manufacturer.
Never pour any liquid bleach directly onto the load. It can cause fabric
damage, such as weakening of cloth fibers or color loss.
ENGLISH
Detergent
Compartment
Page 21