Queries And Technical Problems - Miele professional A 201 Instrucciones De Manejo

Carros inyectores
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 47
en - Intended use
Re-usable medical devices can be reprocessed using this mobile unit
in a Miele washer-disinfector. Follow the instructions for your washer-
disinfector as well as the instructions of the medical device manufac-
turer on how to reprocess their items by machine.
Internal cleaning and disinfection to an appropriate standard is only
possible with instruments which can be sufficiently dismantled and
with adequate use of injector nozzles, irrigation sleeves and adapters.
The reprocessing result of the inside of instruments must be checked
as necessary using a test other than a visual check.
The A 201 mobile injector unit is designed for reprocessing hollow an-
aesthetic and intensive care instruments and materials.
Special holders and injector nozzles are used for securing breathing
tubes, breathing bags, Guedel tubes and endotracheal tubes, breath-
ing masks and bellows.
The mobile injector unit is designed for the most commonly used sil-
icone breathing tubes. The holder on the left hand side of the unit
must be replaced before cleaning breathing tubes of a different dia-
meter or material.
The mobile injector unit is supplied with one holder for paediatric
breathing tubes and one for concertina breathing tubes.
The mobile unit can be used in the following washer-disinfectors:
– PG 8582
– PG 8582 CD
– PG 8592
Medical devices for reprocessing are referred to as the wash load if
they are not more closely defined.

Queries and technical problems

If you have any queries or technical problems that you would like to
discuss please contact Miele. Contact details can be found at the
back of the Operating Instructions for your washer-disinfector or go
to www.miele-professional.com.
33

Publicidad

Tabla de contenido
loading

Tabla de contenido