Playing a tape in various
modes
You can play the tape in various modes:
•INTRO (Intro Scan) lets you play the first 10
seconds of all the tracks.
•NR (Dolby NR) lets you select the Dolby* NR
B system.
•METAL plays CrO
or metal tape.
2
•BL.SKP (Blank Skip) skips blanks longer than
eight seconds.
•ATA (Automatic Tuner Activation) turns on
the tuner automatically while fast-winding
the tape.
* Dolby noise reduction manufactured under
license from Dolby Laboratories Licensing
Corporation. "DOLBY" and the double-D symbol
a are trademarks of Dolby Laboratories
Licensing Corporation.
1
Press (SHIFT), then press (9) (P MODE)
repeatedly until the desired play mode
appears.
Each time you press (9) (P MODE), the
item changes as follows:
INTRO n NR n METAL n BL.SKP n ATA
2
Press (10) (n) to select the desired play
mode setting (for example: ON or OFF).
Playback starts.
3
Press (SHIFT).
To go back to the normal playback mode,
select "OFF" in step 2 above.
Radio
Memorizing stations
automatically
— Best Tuning Memory (BTM)
The unit selects the stations with the strongest
signals and memorizes them in the order of
their frequencies. You can store up to 10
stations on each band (FM1, FM2, MW and
LW).
Caution
When tuning in stations while driving, use
Best Tuning Memory to prevent accidents.
1
Press (TUNER) repeatedly to select the
band.
Each time you press (TUNER), the band
changes as follows:
z FM1
z FM2
2
Press (SHIFT), then press (9) (P MODE)
repeatedly until "B.T.M" appears.
3
Press (10) (n).
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sound and the setting is stored.
4
Press (SHIFT).
Notes
• The unit does not store stations with weak
signals. If only a few stations are received, some
number buttons will retain their former setting.
• When a number is indicated in the display, the
unit starts storing stations from the one currently
displayed.
z MW
z LW
EN
11