Control System - NEO TORCH 4000 Manual De Usuario

age just in case they get caught.
6. Ensure that the system is placed at least 20cm
away from walls or any other objects including
drapes etc.
7. Ensure that the system is placed well away from
any heat sources including spot lights, moving
heads, radiators, etc. Make sure there is a suffi-

7. CONTROL SYSTEM

The overall performance of any our laser system is
also dependent on the control system that you use
for operating the laser as well as the correct device
configuration in the laser control software. There
are many laser control options on the market but
we mainly recommend control systems from these
two manufacturers:
8. SCANNING SYSTEM
The product warranty does not cover the damages
to the scanning system caused by improper use of
the scanning system or by incorrect programming.
Therefore it is essential to understand how the
scanning works and where are the limits of it. In this
manual we will explain only the basics of it but it is
the responsibility of every user to educate them-
selves so they can avoid damage being caused to
the scanning system and costly repairs.
A laser beam comes from a laser module and hits
the two moving mirrors of the scanning system.
These mirrors are mounted on the scanners hafts
and are moved by the scanner rotors, one on X and
one on Y axis.
P. 8
Neo Torch 4000 - English version
cient air-flow around the laser system.
8. It is essential that the fan openings are never
covered during the laser operation.
9. 9. Always follow the Laser Safety Regulations
of respective country where the laser is being
used.
• Pangolin Laser
• Systems Showtacle