TECHNICAL CHARACTERISTICS
Input power internally selectable
Input impedance at nominal power
Output voltages
Frequency response (-3dB)
Dimensions
Weight
AMPLIFIER OUTPUT
BLUE-80W
BROWN-150W
GREEN-300W
For amplifier power selection, connect the corresponding colour wires to "A" terminals of both channels.
The two unused wires of each channel must be connected to dummy terminals marked as "B".
A
INPUT
50.0085.01.00
8
WIRING DIAGRAM (ONE CHANNEL)
300W*
150W*
80W*
* MAX RMS AMPLIFIER OUTPUT POWER (4 OHM)
REAR PANEL DETAIL
CHANNEL 2
OUTPUT
70V
0V
100V
ECLER Laboratorio de electro-acústica S.A.
Motors 166-168, 08038 Barcelona, Spain
INTERNET http://www.ecler.com E-mail: info@ecler.es
B
OUTPUT
0V
100V
0V
80W(150/300W)
4 ohm
70/100V
20Hz÷30kHz
482,6x266,5x44
12,250kg.
100V
0V
70V
0V
CHANNEL 1
INPUT
70V
0V
A