Remote Control; Input - Sony HT-X8500 Manual De Instrucciones

1
Insert batteries (supplied) into the

remote control.

2
Turn on the TV.
3
Turn on the Sound Bar.
4
Point the remote control at the
remote control sensor on the
Sound Bar, and press and hold the
INPUT on the remote control and
BLUETOOTH button on the Sound
Bar simultaneously for 5 seconds.
The TV and BLUETOOTH indicators
flash twice, the Sound Bar enters
the pairing mode, then the
BLUETOOTH indicator flashes
quickly.
Remote control sensor

INPUT

BLUETOOTH
button
BLUETOOTH
indicator
5
On the TV, search the Sound Bar
by performing the pairing
operation.
The list of the BLUETOOTH devices
that are searched appears on the TV
screen.
For the operation method to pair
the BLUETOOTH device to the TV,
refer to the operating instructions of
the TV.
6
Pair the Sound Bar and TV by
selecting "HT-X8500" from the list
on the TV screen.
7
Make sure that the TV and
BLUETOOTH indicators on the
Sound Bar light.
A connection between the Sound
Bar and TV has been established.
8
Select the program or input of the
TV by using the TV remote control.
The sound of the displayed image
on the TV screen is output from the
Sound Bar.
9
Adjust the volume of the Sound
Bar by using the TV remote
control.
When pressing the muting button
on the TV remote control, the sound
is muted temporarily.
Notes
• If the TV sound is not output from the
Sound Bar, press INPUT on the remote
control of the Sound Bar repeatedly to
15
US