Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
10
EN
A
3
1
Set POWER to "CAMERA".
Clock (Lithium) Battery Insertion/Removal
This battery is necessary for clock operation and to
perform date/time settings.
1
2
3
4
5
NOTE:
See "SAFETY PRECAUTIONS"(
on safe handling of lithium batteries.
Viewfinder Adjustment
1
2
2
3
GETTING STARTED (cont.)
SWITCH OFF POWER
Switch off the unit's power and remove the power
supply unit.
OPEN COVER
Open the clock battery compartment cover while
pressing the release tab.
REMOVE BATTERY (when replacing)
Insert a pointed, non-metallic object between the
battery and the compartment (
battery out.
INSERT BATTERY
Ensuring the plus (+) side is up, insert a CR2025
lithium battery and push it in.
CLOSE COVER
Close the compartment cover until it clicks in place.
POSITION VIEWFINDER
Adjust the viewfinder manually for best viewability
(see illustration at left).
SELECT MODE
Set the power switch to CAMERA.
ADJUST DIOPTER
Turn the diopter adjustment control until the
indications in the viewfinder are clearly focused.
) and pull the
A
pg. 2) for information
Publicidad
Capítulos
Tabla de contenido
