Playback; Using The Cassette Adapter - JVC GR-AX1027 Manual De Instrucciones

Ocultar thumbs Ver también para GR-AX1027:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

36
EN
+
VCR
Compact video cassette
Recording safety hole

PLAYBACK

Cassette Adapter (VHS PlayPak)
Use this to play back a VHS-C video cassette recorded
with this camcorder. It is fully compatible with any VHS
video cassette recorder. The C-P7U adapter is battery
powered and automatically performs tape loading and
unloading.
1
2
Compartment door
3
4
Sliding latch
NOTES:
During tape loading and unloading, do not touch the
Reels
reels for safety and tape protection.
During special-effect playback (slow motion, still
frame, etc.), the picture may vibrate or noise bars may
appear on the screen.
To record on a VCR using a compact cassette and the
adapter, cover the adapter's recording safety hole with
adhesive tape.

Using The Cassette Adapter

INSERT BATTERY
Slide the battery cover up to remove it, and install
one "AA(R6)" size battery as shown in the
illustration at left. Then reattach the cover.
INSERT CASSETTE IN ADAPTER
Slide the latch to open the adapter compartment
door, then insert the cassette and close the
compartment door.
PLAY BACK ON CONNECTED VCR
Load the cassette adapter into the VCR and play the
tape back as you would any other.
REMOVE CASSETTE FROM
ADAPTER
Slide the latch and the compartment door opens
automatically. Then insert your finger in the hole on
the underside of the adapter as shown in the
illustration at left, push up and remove the cassette.

Publicidad

Tabla de contenido
loading

Tabla de contenido