Intesis Box PA-RC-KNX-1i Manual De Usuario página 55

®
IntesisBox KNX - Panasonic A.A. (FS / FSM)
3101
3201
F32
3201
4001
F40
4001
4101
F41
4101
F42 4201
En caso que detecte un código de error que no esté en la lista, contacte con el servicio
técnico de Panasonic.
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
®
IntesisBox is a registered trademark of Intesis Software SL
Refrigerant system problem
Compressor overcurrent protection
Compressor discharge temp. protection
Outdoor heat exchanger
temperature sensor problem
Compressor discharge
sensor problem
High pressure switch open circuit
problem
Low pressure sensor problem
Current detector open circuit
Compressor internal protector worked
Valve operation (closed), or refrigerant system
Open phase or lock in compressor
Insufficient refrigerant
outlet Outdoor heat exchanger outlet temperature
sensor (COND TEMP) lead wire, connector
temperature Compressor discharge temperature sensor (DIS
T. TEMP) lead wire, connector
High-pressure switch lead wire, connector
Low pressure sensor lead wire, connector or
valve operation (closed)
Outdoor unit current detector fault or connector
Compressor fault or refrigeration system
URL
Email
tel
Manual de usuario r1 esp
http://www.intesis.com
info@intesis.com
+34 938047134
55 / 62