Handset Name; Auto Answer - Steren TEL-2490 Manual De Instrucciones

4. MENU
4. Press OK key to confirm.
5. Press UP▲ or ▼DOWN key to select the ON or OFF to enable/disable the sounding of
the beep respectively.
6. Press OK key to confirm your selection.
Notes: If you turn the tone on for key tone, a beep for key tone will sound when a key is pressed on the handset.
- If you turn the tone on for battery low warning, a beep will sound when the battery is low.
- If you turn the tone on for the out of range warning, a beep will sound when the handset goes out of range of the
base unit.
• LANGUAGE: the handset will support up to 5 pre-defined languages.
1. Press OK key, then using UP▲ or ▼DOWN key to select LANGUAGE item.
2. Press OK key to enter. First display is ENGLISH.
3. Press UP▲ or ▼DOWN key to select the language. Each language will display in its own
native translation.
4. Press OK key to confirm your selection.

• HANDSET NAME:

1. Press OK key. Using UP▲ or ▼DOWN key to select HS NAME,
2. Press OK key, and the display will show a flashing cursor on the name line.
3. Key in the handset name, if you make a mistake, press R/CLR key to correct. Press key
to confirm.

• AUTO ANSWER:

simply picking it up from the charging cradle. The user is able to select to enable/disable this
auto-answer feature.
• BARRING: You can set 4 numbers (up to 4 digits
each) for call barring. When the call barring is "ON",
any numbers beginning with the programmed digits
will not be able to be dialed out, and LCD will display
CALLS BARRED
1. Press OK key. Using UP▲ or ▼DOWN key to
select BARRING,
2. Press OK key the user will be prompted to enter
the PIN code, input 4-digit code (defaulted as 0000).
the operation will allow the user to change the handset name
the Handset can be set to answer an incoming call automatically by
PIN?
UP DOWN
OK
R/CLR INT RD/P
23 23