Descargar Imprimir esta página

Baby Jogger city select lux Instrucciones Para El Ensamblaje página 11

Ocultar thumbs Ver también para city select lux:

Publicidad

Idiomas disponibles

Idiomas disponibles

USING SAFETY HARNESS
21 Insert side strap buckle into harness
buckle on both sides.
22 Insert connected harness and side strap
buckles into the sides of the crotch
buckle.
23 Press button on crotch buckle to
release.
PLACE THE SEAT ON THE FRAME
24 Align the Accessory Mounting Brackets
with the mounting brackets on the
stroller frame.
25 Slide the seat into the brackets until it
clicks into place. Ensure that both sides
of the seat are securely fastened into
the frame before use.
NOTE: The seat may be installed either
forward-facing or rear-facing.
REMOVE THE SEAT
26 Press gray tabs on Mounting Brackets
and pull up.
WARNING: Always remove your child
from the seat before removing the seat
from the frame.
RECLINE THE SEAT
27 Squeeze the Seat Recline Button
located at the top of the seat, behind
the canopy.
28 Pull down to lower the seat and pull up
to raise the seat until it clicks into the
desired position.
HANDLE HEIGHT ADJUSTMENT
29 Squeeze the Handle Adjustment Button
and slide the handle up or down to the
desired length.
ADJUSTABLE FOOTWELL
30 Adjust the angle: Press the Adjustment
Buttons on the Footwell and move it up
or down until it clicks into the desired
position.
BASKET REMOVAL
31 Unfasten the top snaps of the Basket
around the middle support bar of the
frame. Then unfasten the bottom snaps
around the side support bars of the
frame.
32 Unhook the top front plastic loop from
over the metal knob on the back of the
frame. Repeat for the opposite side.
FOLDING
• Remove your child from the seat.
• The stroller may be folded with or
without the seat attached, and forward-
facing or rear-facing.
• When folding rear-facing, it is
recommended that the seat be reclined
all the way before folding.
• Always recline the seat to its most
upright position and place it in the
forward-facing for the most compact
fold.
33 Pull up on the seats footwell and fold
the seat upwards.
34 Pull up on the quick fold handles and
let the frame collapse. Make sure the
storage lock lever clicks into place.
REMOVING THE SEAT FABRIC
35 Unsnap the seat fabric from the seat
frame.
36 From the back of the seat, unfasten the
hook-and-loop and slide the strap
through the D-ring.
37 Press the Footwell Adjustment Buttons
and pull out on the Footwell to remove
the footwell bar from the seat frame.
Pull the seat fabric out of the channel in
the Footwell bar.
11
EN

Publicidad

loading